ESA title

Additional application information

This page contains additional information on how to apply to the InCubed programme. Please read How to apply and What we are looking for first.

Two development cycles

There are two development cycles available within InCubed and you may apply for either one, or both. The aim of each cycle is to reach a minimum viable product. Entry depends on the maturity of the proposed development.

The De-risking Cycle

This cycle results in a credible technical concept with identified commercial customers that show tangible interest and a robust product development roadmap. Developments in this cycle are typically less mature and require support to reach a credible commercial product or service.

The Product Development Cycle

This cycle results in a credible product or service that can be shown to be commercially viable without further public funding. Developments in this cycle are typically more mature.

It is possible to move from one cycle to another as the development matures, or enter directly into the Product Development Cycle when maturity allows it.

InCubed development cycles overview

Each cycle may have different co-funding levels depending on supporting Member State and target readiness levels (for example TRL). Applications can include both cycles, and overlap is possible if clearly justified.

InCubed can also support further roll-out when applicable. Additional external funding may be sought to scale internationally or deploy additional elements such as constellations, networks and architectures.

Funding options and conditions

ESA can support up to 80% of the total costs as detailed in the table below. The required objectives per development cycles and segments shall be respected.

InCubed co-funding options by development cycle
Cycle TRL Funding Level up to %(of total allowable cost) Funding level for Universities, Public Sector Entities or Research Institutes with no commercial Interest
Non-SME SME
De-risking Up to 4-6 Up to 75% (1) Up to 80% Up to 100% of maximum
30% of the cycle costs
Product development Up to 7
(8 for IOV)
Up to 75% (1) Up to 80% Up to 100% of maximum
30% of the cycle costs

(1) Depending on the technological or market risks as assessed by the Agency.

InCubed main activities and objectives by development cycle
Cycle Main activities Objectives
De-risking Mitigation of identified technical risks before the product development cycle can be initiated. Business analysis to consolidate and de-risk the business case. System/technical study, technology development or manufacturing (e.g., EM, breadboard, prototype, software alpha/beta version). Verification testing excluding any qualification or industrialization activity. Proof-of-concept and technical/business risk mitigation for all segments: system analysis, Business analysis, EM, breadboard or prototype of full to partial end-to-end integrated system.
Product development Development, qualification, verification, industrialization and validation. Final outcome: product ready for commercialization. Space Segment/End-to-End: (E)QM, PFM or similar including IOD/IOV in a (pre)operational environment. Ground/Data Segment: final product verified in an (pre)operational environment. OPTIONAL: Validation of all segments in a (pre)operational environment.

The Call for Proposals is published on ESA-STAR PUBLICATIONS, under Open Invitations to Tender reference 4-40047.

To obtain co-funding from ESA, your company must be registered on ESA-STAR.

Note: official ESA-STAR documentation takes precedence in case of discrepancies, and consultation of APO documentation is available to duly registered users.

Participating Member States

Co-funding is available only to companies residing in participating ESA Member States subscribed to InCubed.

The size and nature of potential co-funding is subject to authorisation from supporting national delegation(s). An email of support is needed initially, followed by a formal Letter of Authorisation from the relevant delegation(s).

Some national delegation(s) have specific procedures and timelines. Details for countries that deviate from the standard InCubed process are available in National requirements.